| Customization: | Available |
|---|---|
| Certification: | RoHS, CE |
| Type: | Caritridge |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
SUPERB Heater Cartridge heater is cylindrical electrical heating elements. Protected with a seamless stainless steel sheath, their watt density can reach 63W/cm² and their operating temperature can go up to 1000°C (1832°F). Mostlycartridge heater is used for heating up solids such as injection presses heating plates or various tools, cartridge heater can also beused for heating up water of gases under certain conditions. Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc . Cartridge heaters are also commonly found in the chemical, electronics, medical equipment, packing and nuclear industries. Various cartridge heater technologies are available. The choice of technology will depend on technical specifications required and the application. Unless you know exactly which product you are looking for, we will recommend you the best solution for your need
1) The heating part of the core of the Superb Heater cartridge heater is a nickel-chromium heat-resistant alloy wire, which is wound on a magnesium oxide core rod with excellent insulation and thermal conductivity. The heating wire and the shell are filled with magnesium oxide powder as an insulating material, and the air inside is compressed by the machine to make it into a whole.
| Main material | |
| Heating wire | Ni8Cr20 nickel chromium wire |
| Insulation filling | High purity magnesium oxide powder |
| Shell (protection tube) | SS304,SS321,SS310S,SS316,TA1,Incoloy800(NCF800) |
| Lead |
Silicone glass fiber (temperature resistance 250ºC) PTFE (temperature resistance 250ºC) High temperature glass fiber (temperature resistance 400ºC) Ceramic beads (temperature resistant to 800ºC) |
| Lead protection |
Silicone fiberglass sleeving, SUS braided hose, SUS hose
|
| Sealed end (sealing) | Ceramic/ceramic glue (temperature resistant 800ºC) Silicone rubber (temperature resistant 180ºC) Resin (temperature resistance 250ºC) |
Standard diameter size reference
1) DiameterΦ in mm: 2, 3, 4, 5, 6, 6.5, 8, 9.5, 10, 12, 12.5, 14, 15, 15.8, 16, 18, 19, 20, 25, 30, etc.
2) DiameterΦ inch: 1/4", 3/8", 1/2", 5/8", 3/4", 1", etc. (Remarks: 1 inch = 25.4 mm)
3) Note: High-power cartridge heater are used in the mold heating, and mounting holes need to be reserved on the mold according to the size of the cartridge heater (or the outer diameter of the cartridge heater can be customized according to the size of the mounting hole).Superb Heater suggest Minimize the gap between the cartridge heater and the mounting hole. When machining the mounting hole, it is recommended that the gap on one side be less than 0.05mm.
){kind=link}